Drag due to a circular cavity in a plate with a turbulent boundary layer at subsonic, transonic and supersonic speeds
ESDU 74036 gives curves, derived from a correlation of experimental results obtained on a plate at zero incidence, for predicting the increment in drag for Mach numbers less than 3. The curves apply to a cavity with sharp edges, walls normal to the plate, flat bottom and no through flow; no information is available on rounding or chamfering the corners, but such edge modifications should not be assumed to be beneficial. The depth/diameter ratio varied from 0.04 to 1.5 but a method of dealing with a cavity in which the ratio is less than 0.04 is explained. The data apply strictly in zero pressure gradient but guidance on their use where there is a pressure gradient is given.
An accompanying Toolbox app is provided that implements the method using ESDUpac A7436.
|Data Item ESDU 74036|
The Data Item document you have requested is available only to subscribers or purchasers.
- Subscribers login here.
- If you are not an ESDU subscriber you can
- find out how to subscribe, or
- purchase this Data Item from the IHS Standards Store.
This Data Item is complemented by the following software:
|Toolbox 74036 Run||
|Toolbox CFM Run||
|Toolbox ASTEROID Run||
|Toolbox ASTEROID fp Run||
This program is only available to subscribers.